top of page
Kevlar\Carbon and Shimmer Twill | 95 - 110 inches

Kevlar\Carbon and Shimmer Twill | 95 - 110 inches

PriceFrom $235.00
PLEASE NOTE: The reason we charge $125 extra if you choose to have your extra long fixed-length extension shipped in one piece is that the shipping cost on our 95 inch and longer extensions is MUCH higher if shipped in one piece.  This is due to shipping fees associated with very long packages.
 
A fixed length tiller extension comprised of carbon fiber and fiberglass to balance weight and durability.
 
The outer layer of material on the colored kevlar units is a 2 by 2 kevlar\carbon twill whereas the outer layer on the gold shimmer unit is a 2 by 2 carbon twill with a reflective material woven in.
Color
0/500
Quantity

  • Attachment End Descriptions

    Bare Tube - A rubber tendon will fit directly into our tiller extensions but is NOT INCLUDED in your purchase.

    Plastic End for common 1/4 inch pin and yoke. - This plastic end accomodates the common 1/4 inch pin and yoke that comes stock on many boats.  The matching stainless steel yoke, which MUST BE PURCHASED SEPARATELY from our "Tiller Extensions and Accessories" page, consists of a stainless steel bolt with the common 1/4 inch pin yoke welded to the bolt to reduce slop, 2 plastic washers, and a locknut.

     

    IMPORTANT NOTE: On some common older boats, the height of the hole in the steel yoke was less than it is on common stock yokes today.  The Plastic End for 1/4 inch pin we sell accommodates for the newer stock design of these yokes.

     

    IF YOU HAVE AN OLDER MODEL OF THE COMMON 1/4 INCH PIN YOKE OR YOU DO NOT HAVE ONE AT ALL,  YOU CAN SELECT ABOVE TO HAVE THE "PLASTIC END FOR 1/4 INCH PIN" GLUED INTO THE END OF YOUR TILLER EXTENSION AND YOU CAN PURCHASE THE STAINLESS STEEL PORTION OF THE ATTACHMENT ASSEMBLY FROM OUR "TILLER EXTENSIONS AND ACCESSORIES" PAGE. 

     

    !!!THE STAINLESS STEEL 1/4 INCH PIN YOKE WE SELL COMES WITH THE BOLT HEAD WELDED ON FOR REDUCED SLOP!!!

bottom of page