top of page
Carbon Twill | Choose from 70 - 110 inches | $154 - $229.95

Carbon Twill | Choose from 70 - 110 inches | $154 - $229.95

PriceFrom $154.00
PLEASE NOTE:  If you order over 94 inches with Standard Shipping through our checkout, we will send the extension to you in 2 pieces along with a free inside repair ferrule for splicing the extension together.
 
If you are interested in purchasing a fixed-length extension longer than 94 inches (not including the plastic end) and would like to receive it full length, please email us for a quote including additional cost of shipping for an over-sized package.
 
A fixed length tiller extension comprised of carbon fiber and fiberglass to balance weight and durability.  Price will vary depending on the length range you select below.  Choose your length between 70 inches and 110 inches, which does not include the length of the attachment end you may so choose.
 
The outer layer of material on this unit is a 2 by 2 carbon fiber twill.

  • Attachment End Descriptions

    Bare Tube - A rubber tendon will fit directly into our tiller extensions but is NOT INCLUDED in your purchase.

    Plastic End for common 1/4 inch pin and yoke. - This plastic end accomodates the common 1/4 inch pin and yoke that comes stock on many boats.  The matching stainless steel yoke, which MUST BE PURCHASED SEPARATELY from our "Tiller Extensions and Accessories" page, consists of a stainless steel bolt with the common 1/4 inch pin yoke welded to the bolt to reduce slop, 2 plastic washers, and a locknut.

     

    IMPORTANT NOTE: On some common older boats, the height of the hole in the steel yoke was less than it is on common stock yokes today.  The Plastic End for 1/4 inch pin we sell accommodates for the newer stock design of these yokes.

     

    IF YOU HAVE AN OLDER MODEL OF THE COMMON 1/4 INCH PIN YOKE OR YOU DO NOT HAVE ONE AT ALL,  YOU CAN SELECT ABOVE TO HAVE THE "PLASTIC END FOR 1/4 INCH PIN" GLUED INTO THE END OF YOUR TILLER EXTENSION AND YOU CAN PURCHASE THE STAINLESS STEEL PORTION OF THE ATTACHMENT ASSEMBLY FROM OUR "TILLER EXTENSIONS AND ACCESSORIES" PAGE. 

     

    !!!THE STAINLESS STEEL 1/4 INCH PIN YOKE WE SELL COMES WITH THE BOLT HEAD WELDED ON FOR REDUCED SLOP!!!

bottom of page